The project receives the mixed audio of
Ableton at channel 1. Ableton is used as a playback machine
only, so the main mix will occur in scope. For sending audio
data from Scope to Ableton, the Micromixer is used to allow the
selection, which sound is sent to Ableton. If scope and
Ableton are both configured for listening while recording, a
feedback loop might show up. So you may need to mute undesired
sources. The Prisma synth can either be fed by external MIDI
input of Scope or Ableton. A MIDI destination to feed from scope
to Ableton is not wired in this project yet. Note: If Ableton is
not used on the Scope machine, it can also work with an ADAT
interface connected to Scope/Xite. |